’Appendix A¶

1.17.0 (2021-10-01)¶

Improvements¶

Added support to PostgreSQL 14 (LIV-66).
Added support to Debian 11 (LIV-70).

Bug fixes¶

Now --recheck will always require a session ID (LIV-76).
Minor fixes to the documentation (LIV-26, LIV-68, LIV-80).

1.16.0 (2021-08-04)¶

Performance Improvements¶

Now Oracle versus Postgres comparison sessions can use a common row hash based on MD5 that improves performance for the general use case. Previously, Oracle versus Postgres comparison was limited to comparison_algorithm = full_row, but now comparison_algorithm = row_hash or even comparison_algorithm = block_hash can be used. By default, it’s set to comparison_algoritm = block_hash. Due to Oracle limitations, using the Common Hash, BLOB and CLOB fields are limited to 2000 characters, and the entire row can not be wider than 4000 characters. Tables not meeting the requirements for the Common Hash can be compared separately using comparison_algorithm = full_row. Please check the documentation for additional details (RT72038, LIV-61).
Increased the default value for buffer_size from 256 rows to 4096 rows.
Increased the default value for parallel_chunk_rows from 1 million rows to 10 million rows.

1.15.0 (2021-06-06)¶

Improvements¶

Introduced conflicts filtering for --conflicts execution mode (LIV-40)
LiveCompare will assume force_collate = C in mixed technologies comparison (like Oracle vs PostgreSQL) if no collation is specified (LIV-44).
Besides support to EPAS 13, which was already added, added support to EPAS 11 and 12 (LIV-48).

Bug fixes¶

LiveCompare is not getting stuck anymore in Oracle vs PostgreSQL comparisons (RT71243 / LIV-43)
Fixed a bug where it was not possible to run --recheck on a comparison session that was created with --conflicts (LIV-50)

1.14.0 (2021-05-14)¶

New features¶

New --conflicts execution mode, specific for BDR 3 clusters. For BDR 3.6, table bdr.apply_log is checked, and for BDR 3.7, table bdr.conflict_history is checked. LiveCompare is able to extract the PK values from the conflict logged rows (key_tuple, local_tuple, remote_tuple and apply_tuple) and perform an automatic cluster-wide comparison only on the affected table, already filtering by the PK values. The comparison will then check the current row version in all nodes in the cluster. By checking only the BDR conflicts, the comparison is much faster than --compare mode, so it’s feasible and recommended to be executed often to ensure cluster consistency (LIV-28).

Improvements¶

LiveCompare is now able to ignore BDR nodes where a specific table does not exist, or the table does not receive any replicated data according to replication set configuration. Previously the comparison was performed on all connections, now the comparison consensus is able to automatically filter out nodes per table as needed. Consensus majority is still achieved among the nodes where the table exists, and where the table is associated with a replication set the node is subscribed to. This allows for comparison on BDR cluster that have different architectures defined by replication sets, including properly ignoring BDR Witness nodes (LIV-29).
Improved message for --help showing a small description for all execution modes (LIV-28).
Information about if the column is nullable or not is now also gathered in table metadata (LIV-28).
Clarified in docs that unsortable data types are converted to string if the columns are part of the primary key (LIV-4).
Clarified in docs that oracle_ignore_unsortable ignores unsortable columns which are not part of the PK in Oracle (LIV-26).
Clarified in docs that parallel_data_fetch can be enabled (it is by default) when data_fetch_mode is set to prepared_statements (default) or server_side_cursors_with_hold (LIV-26).
Clarified in docs that max_parallel_workers default value is 2 (LIV-26).

Bug fixes¶

LiveCompare is now handling types as schema qualified names. Types out of search_path could not be found by LiveCompare before this fix (LIV-35).

Deprecation¶

Removed usage of bdr.difference_fix* functions that are deprecated on BDR 3.7. Those functions are still included in the generated DML scripts for BDR 3.6, as they require a bdr_superuser rather than a PostgreSQL superuser. This is clarified in documentation (LIV-1,LIV-31).

1.13.1 (2021-04-14)¶

Bug fixes¶

Fixed issues in support for Oracle data types RAW and ROWID (RT69656).
Fixed an unhandled exception when a binary object field from Oracle was NULL (RT69656).
Fixed an issue on Oracle x Postgres comparison support involving dollar-quoted strings (RT69656).
Fixed a corner case where columns named as a particular PostgreSQL reserved key word were being quoted and not being considered in the comparison (RT69656).

1.13.0 (2021-02-25)¶

Performance improvements¶

Implemented new setting data_fetch_mode, which applies only for PostgreSQL connections. It can assume one of the following values:
- prepared_statements: Default behavior in this and previous versions, using prepared statements to fetch data. Smaller footprint on the database, good performance for the general use case. It’s stronly recommended for production databases.
- server_side_cursors_with_hold: Uses a server-side cursor WITH HOLD to fetch data, which can hold back xmin and increase memory and temp file usage on the database, as each chunk of data is materialized in temp files before being sent to LiveCompare. As a result it can be faster for multiple small tables, and is recommended for testing and migration scenarios.
- server_side_cursors_without_hold: Uses a server-side cursor WITHOUT HOLD to fetch data, which can hold back xmin, but memory and temp file usage on the database is lower than WITH HOLD. It can be faster for large tables and is recommended for low load databases.

Other improvements¶

Implemented new setting abort_on_setup_error, when enabled tells LiveCompare to abort the whole comparison session if there is any error when setting up a comparison round for any table. Disabled by default, which means that LiveCompare will log and ignore any tables where the setup phase failed for any reason.
Because of new setting abort_on_setup_error, settings setup_max_attempts and setup_min_interval_between_attempts are now obsolete.

1.12.0 (2021-02-11)¶

New Features¶

Implemented new setting session_replication_role. If enabled will set session_replication_role to replica in beginning of apply scripts (RM20247, RT69742).
Implemented new setting split_updates. If enabled will split UPDATE statements into corresponding DELETE and INSERT statements (RM20355, RT69742).
New connection setting fetch_fk_metadata, which tells if metadata about foreign keys should be fetched on the specific connection. Enabled by default.
New general setting oracle_fetch_fk_metadata, which overrides the value of fetch_fk_metadata for the Oracle connection. Disabled by default (RM20244, RT69656).
New general setting float_point_round, which when tells LiveCompare to round by the specified decimal digits when comparing float point values. Disabled by default (RT69381).

Removed features¶

Removed --fix execution mode. User are encouraged to review the DML script LiveCompare generates.

Improvements¶

Apply scripts generated by LiveCompare now contain also difference_fix_start_query at the beginning and sets tables owner before applying DML.
Now comparison_algorithm = full_row honors parallel_chunk_rows and splits the table into multiple workers if technology being compared in all connections is PostgreSQL. To disable table splitting, set parallel_chunk_rows = 0.
Filtering out tables in system schema sys when comparing EPAS (RM20392).
Increased default value of max_parallel_workers from 2 to 4.

Bug fixes¶

Fixed a performance degradation when comparison_algorithm = block_hash and there were divergences in the data chunk a parallel worker was processing.
Fixed an issue where the default randomly generated string for custom_dollar_quoting_delimiter was causing LiveCompare to crash on FIPS-enabled operating systems (RT70032, RM20378).
Fixed an issue where oracle_ignore_unsortable or column_intersection could remove all columns, and LiveCompare would still try to perform a comparison. Now LiveCompare aborts comparison on those tables and logs a proper message (RT69656).
Fixed a corner case where LiveCompare was not using the custom_dollar_quoting_delimiter to represent PK values (RT69656).
Fixed a bug where running LiveCompare on --recheck mode could hurt a constraint on its output schema due to difference ordering.

1.11.0 (2021-01-19)¶

Improvements¶

New setting difference_statement_order for the order of the DML commands generated by LiveCompare, by default set to delete_update_insert (RT69742, RM20245).
Support for EnterpriseDB PostgreSQL Advanced Server - EPAS 13.
Packaging for PostgreSQL 13 on CentOS and RHEL systems.

Bug fixes¶

Fixed a bug where if a cursor was not initialized yet because its minimum PK value was higher than the maximum PK value of a cursor that has already reached end of data, the former cursor would be initialized but its data would not be read until the end (RT69742, RM20249).
Fixed a bug where LiveCompare was not allowing Initial Connection and node_name when logical_replication_mode = pglogical (RM19795).
Fixed a bug where LiveCompare was forcing the need of oracle_user_tables_only = on when schema_qualified_table_names = on instead of forcing it when schema_qualified_table_names = off (RT69656).
Fixed a bug where strings were not properly quoted if comparison_algorithm = full_row (RM20251).
Fixed a bug where strings were not properly quoted in the generated DML.

1.10.1 (2020-10-29)¶

Bug fixes¶

Improved performance for fetching minimum and maximum primary key values for each table, which is done in the initial metadata fetch phase (RM19681, RT69088).
Now comparison sessions can be resumed and execution modes --fix and --recheck can be executed against previously created comparison sessions in a different LiveCompare version, if it is on the same major version. For example: if a session was created on 1.10.0, customer upgrades LiveCompare to 1.10.1, and then runs --fix, LiveCompare will allow the --fix mode to execute, because the session was created in the same major version (RM19686, RT69088).
Fixed a single quote issue when saving Row Filter in LiveCompare metadata (RM19682, RT69088).
LiveCompare default dollar quoting delimiter (when custom_dollar_quoting_delimiter is not set) is now a fixed hash string to tackle an issue where resuming a comparison session was not working because the random setting value changed between executions (RM19684, RT69091).
Setting custom_dollar_quoting_delimiter can now be explicitly disabled with off, which means LiveCompare will use the default hash string as a delimiter. (RM19685, RT69091).

1.10.0 (2020-10-02)¶

Improvements¶

New general setting custom_dollar_quoting_delimiter, to tell LiveCompare how strings should be quoted when generating Postgres DML commands. When not set (default), LiveCompare generates a random string to use as dollar quoting delimiter (RT68950, RM19159).
LiveCompare now checks that neither settings nor connections attributes were changed between the first execution of a session (session creation) and following ones (resume, --recheck or --fix) (RM17639).
LiveCompare now can be softly stopped when running in background or in a different shell window (RM18564).

Bug fixes¶

LiveCompare was not updating number of differences correctly while running in --recheck mode after user had applied fixes manually using the apply_on_the_<node>.sql file (RM19158).
If LiveCompare was executed multiple times in --recheck mode, it would show replicated entries in apply_on_the_<node>.sql files and also in the summaries a replicated count of differences/fixes (RM19176).
A large number of divergences would cause an integer out of range error in summary views (RM18705).

1.9.1 (2020-08-13)¶

Bug fixes¶

We are now handling POSIX constants that may not exist on a given platform (RM18197).
When dealing with partitioned tables, if the user set a table filter to remove any of the partitions, LiveCompare would compare both master table and all other children except for the filtered. That is now fixed. (RM16912).

New features¶

Setting full_comparison_mode = on|off was deprecated and replaced with a new setting comparison_algorithm which allows the new block_hash algorithm setting - this showed 50% performance gain in basic tests. Full list of supported algorithms are these:
- full_row (same as old full_comparison_mode = on): Disables row comparison using hashes. It also disables table splitting, because it relies on a hash, so the setting parallel_chunk_rows is ignored and not tables are split. Full comparison, in this case, is performed by comparing the row column by column. If any data connections are not PostgreSQL, then LiveCompare automatically sets comparison_algorithm = full_row.
- row_hash (same as old full_comparison_mode = off): Enables row comparison using hashes and enables table splitting. Tables are split so each worker compares a maximum of parallel_chunk_rows per table. Data row is hashed in PostgreSQL, so the comparison is faster than full_row. However, if for a specific row the hash does not match, then for that specific row, LiveCompare will fallback to full_row algorithm (i.e., compare row by row). This setting is allowed only if all data connections are PostgreSQL.
- block_hash (new implemented comparison algorithm): Works the same as row_hash, but instead of comparing row by row, LiveCompare builds a “block hash”, i.e., a hash of the hashes of all rows in the data buffer that was just fetched (maximum of buffer_size rows). Conceptually it works like a 2-level Merkle Tree. If the block hash matches, then LiveCompare advances the whole block (this is why this comparison algorithm is faster than row_hash). If block hash does not match, then LiveCompare falls back to row_hash and performs comparison row by row in the buffer to find the divergent rows. This setting is allowed only if all data connections are PostgreSQL. This is the default value (RM14146).
LiveCompare now is able to do a few attempts on each table setup before exiting with an error. Two new settings were added to configure this behavior: setup_max_attempts (defaults to 3) and setup_min_interval_between_attempts (defaults to 30 seconds) (RM17518).

Improvements¶

LiveCompare output is now printed in the output file while using > to redirect output and also displayed while executing LiveCompare through ssh (RM17372).
Consensus was re-factored for improved logging and debugging (RM17107).
At the end of the comparison session, LiveCompare now shows counter for issues that were found, depending on the log level (RM18196).
DML is now being generated for all nodes in case of a Tie (RM16656).
LiveCompare is now showing the maximum number of ignored columns on the table summary, if any divergences are found on a given table (RM16581).
LiveCompare is now aborting with proper message in case Output or Initial (if specified). connections are not reachable. Also aborting with proper message if less than 2 data connections were reachable. If 2 or more are reachable, will compare just that ones (RM14030).
Debian and Ubuntu packages now require python3-setuptools (RM17232).
Clarified in docs about minimum Python version and Linux distributions supported (RM17232).
When dealing with partitioned tables, LiveCompare will prefer scanning each partition instead of using the master table. This way we achieve a better estimation of row count and also better split of job between workers (RM16912).
Using POSIX standard return codes instead of difference count (RM18197).
Added a sample config.yml example in docs showing how to install LiveCompare using TPAexec (RM15312).
Improved logging for --recheck and --fix modes (RM15768).
If any exception happens, Python stack trace is included in logs (RM17158).
Included in the docs some considerations about LiveCompare connecting to PostgreSQL through PgBouncer (RM18019).
Added round_id and round_part fields to the vw_running_processes view, which helps checking comparison progress when LiveCompare execution is scheduled as a cron job (RM16910).

Bug fixes¶

Fixed a racing condition in Consensus that caused a tuple concurrently updated in the Output Connection (RM17107).
Fixed an issue where num_processed_rows was reported higher than the real value (RM17373).
LiveCompare is not reporting successfully executed anymore if any kind of problems were found during execution (RM17289).
Enforced having at least one worker in order to avoid hanging if the user set max_parallel_workers <= 0 (RM17374).
Fixed number format for large integers on printed tables. LiveCompare is now displaying the entire number instead of using scientific notation (RM16683).
Fixed an issue where --recheck mode was reporting incorrect difference statuses after --fix mode was executed (RM15953).
Fixed an issue where the list of ignored columns was being incorrectly reported in table metadata (RM17663).
Fixed an issue where re-running LiveCompare with a different source of truth or tie breakers would cause divergences being incorrectly reported as ties (RM17909).

New features¶

New setting difference_sources_of_truth, used to tell which connections should always win consensus. Requires that consensus_mode is set to source_of_truth (RM15952).
New setting work_directory, which indicates where the session folder will be created. Useful to run LiveCompare scheduled as a cron job (RM16476).

Improvements¶

Order of DML commands written to the difference fix DML script now takes foreign keys into account. Same order is also used by the --fix execution mode (RM15766).
LiveCompare now checks difference_tie_breakers and difference_sources_of_truth against the list of known connection IDs. If an unknown connection ID is specified, an error will be shown to the user and the comparison will be aborted (RM16622).
Added support for CentOS 8 and Ubuntu 20.04 (RM14480, RM14619, RM14974).
When printing regular tables, it would print an empty cell when data is null. Now prints [null] instead (RM16686).

Bug fixes¶

Fix minor issues detected by Coverity scanner (RM16623).
Now deals correctly when the main script is invoked with only three parameters, making the correct distinction whether it is a session ID or an execution mode.
When printing tabular data in transposed format, if data was null then the whole field would be omitted. This issue is now fixed (RM16686).

Breaking changes¶

Implemented LiveCompare execution modes:
- --compare: default execution mode. Only performs comparison, there is no difference re-check/fix thread executing in parallel anymore. During comparison, each difference found is stored in the difference_log table for later re-check and optional automatic fix.
- --recheck: Can be executed against a session that was already created by the compare mode any number of times. Re-checks differences one by one and updates the difference_log table.
- --fix: Can be executed against a session that was already created by the compare mode. Re-checks differences one by one and tries to automatically fix them, updating the difference_log table.
In compare mode, the view that holds the list of divergences is vw_open_differences, while for re-check and fix modes, the view is vw_differences.
In automatic fix mode, for BDR >= 3.6.18, LiveCompare uses the new pre-created replication origin called bdr_local_only_origin (RM14699).
Removed settings difference_mode, min_time_between_difference_checks, max_difference_check_attempts and difference_check_nap_time.
Removed settings live_mode, min_time_between_rounds and max_tail_rounds_before_full_round.
If setting show_progress_bars is enabled (it is by default) and Python module tqdm is < 4.16.0, LiveCompare aborts explaining how to upgrade.

New features¶

Implemented new general setting column_intersection, disabled by default. When this setting is enabled, LiveCompare allows comparison of tables containing different set of columns, as long as PK columns are the same. The set of columns considered in the comparison is the intersection of columns existing on the table on all connections (RM14147, RT67064).
Implemented new section Column Filter, where for each table it is possible to define a comma-separated list of columns that should be ignored in the comparison. Columns that are part of the PK can’t be ignored. The format of this section is one table per line, similarly to the Row Filter section (RM14629, RT67064).
Implemented new general setting oracle_ignore_unsortable, disabled by default. When enabled, tells LiveCompare to ignore columns with Oracle unsortable data types (BLOB, CLOB, NCLOB, BFILE) if table has no PK. If enabling this setting, it is recommended to also enable column_intersection (RT67064).
Implemented new general setting oracle_user_tables_only, disabled by default. When enabled, tells LiveCompare to fetch table metadata only from the Oracle logged in user, which is faster. Also, Table Filter -> tables can be filtered by table name without schema name (RT67064).
Implemented new general setting schema_qualified_table_names, enabled by default. Disabling it allows comparison of tables without using schema-qualified table names: on Oracle x Postgres comparisons, it requires also enabling oracle_user_tables_only, while on Postgres x Postgres, it allows for comparisons of tables that are under different schemas, even in the same database. Also, when schema_qualified_table_names is enabled, Table Filter -> tables, Row Filter and Column Filter allow table name without the schema name. (RM14901, RT67042).
When schema_qualified_table_names is enabled and start_query is not set (default), then LiveCompare uses start_query to clear search_path in order to protect from CVE-2018-1058 (RM15391).
Implemented new general setting force_collate, by default set to off, which means that a collation will not be forced in PostgreSQL. When set to a valid collation name, it is useful to compare Postgres databases that have different collation or Oracle versus Postgres databases if Postgres has a collation other than C (in this case users should set force_collate = C) (RM15016, RT67064).
Implemented new general setting fetch_row_origin, disabled by default. When this setting is enabled, LiveCompare fetches the BDR/pglogical origin name for each divergent row (RM14487).
If an exception is found during a comparison, now LiveCompare aborts the comparison round for the specific table writing the error in new column rounds.round_error, putting the failed worker back into the pool (RT67064).
LiveCompare general progress bar now shows the number of tables aborted due to errors during the comparison.

Improvements¶

Opening connections at the beginning and re-using database connections (RT67042).
Clarified error message when user does not have permissions to read the configuration file (RT67064).
Clarified in the docs that Table Filter and Row Filter require schema-qualified table names unless the general setting schema_qualified_table_names is disabled, and provided configuration examples (RM15311, RT67669).
Aborting with error message if an unrecognized setting is found in the configuration file.
Clarified in the docs about the number of connections required.
Clarified in the docs about the dependency on the EPEL repository for CentOS/RHEL.
Clarified in the docs on how to install the cx_Oracle Python module for the postgres operating system user.
Added a lc_ prefix to session directory and log file.
If in any connection technology = oracle and Python module cx_Oracle is not found, LiveCompare aborts explaining how to install latest cx_Oracle for the current user.
Automatically generated DML *.sql scripts now include a SET LOCAL bdr.xact_replication = off; clause for BDR.

Bug fixes¶

Fixed an issue where an Oracle versus Postgres table comparison was being aborted due to a column name mismatch being incorrectly assessed because the column name is a reserved word in Postgres (RT67064).
Oracle: Fixed an issue where a PK with a text column might generate an ORA-00920: invalid relational operator error (RT67064).
Fixed an issue in Oracle and Postgres where a column of an unsortable data type was not being properly handled in ORDER BY clauses (RT67064).
Fixed an issue in the DML generator where an UPDATE was not setting a column to NULL, because the setting difference_allow_null_updates was being misinterpreted.
Fixed a corner case where the comparison cursor was not properly advancing.
Fixed error message for when user tries to resume a comparison session that is already finished.

If PostgreSQL >= 11, using built-in function hashtextextended instead of hashtext to split data among the comparison workers (RT67167, RM13664).
Fixed an issue where the list of Oracle PK column names was having duplicate column names, resulting in an error and comparison being aborted (RT67064, RTM14145).
If can’t initially connect to data connections, now LiveCompare aborts the whole comparison session (RT67042).
Fixed an issue where the round state was being saved too frequently and not honoring min_time_between_round_saves. Improves performance.
Improved logging of connection and query issues.

Setting parallel_data_fetch is automatically disabled if one of the connections is Oracle, as Oracle does not support parallel_data_fetch (RM13714, RT67042 and RT67064).
Increased maximum number of rounds that can be performed, rows that can be processed and differences that can be found in a single comparison session (data type from integer to bigint) (RM13664 and RT67167).
Changed progress bars from ASCII to Unicode.
Updating global progress bar time elapsed every 5 seconds.
Removed rate and estimated time from global progress bar, and added number of connections.
If Python module TQDM >= 4.16 is available, the global progress bar shows additional stats (number of differences found and automatic fixes applied).
Fixed an issue where the maximum number of processes was limited by the number of tables scheduled to be compared, even if the table was split.
Reduced log verbosity from INFO to DEBUG when getting table metadata.
Including in log cases where a manual (Ctrl-C) or automatic interruption (stop_after_time) happens.

Implemented parallel data fetch to improve performance of multi-way comparison. Parallel data fetch is enabled by default but can be disabled by setting parallel_data_fetch = off.
Fixed an issue where the row was local, i.e., its xmin was not associated to any replication origin (RT66906).

Multi-way comparison: LiveCompare is now able to compare any number of connections. Comparison is done by fetching data from all nodes at the same time. This allows determination of data inconsistencies based on consensus (both quorum-based or simple majority are supported) and an optional list of tie breaker connections. It is possible to see details on how LiveCompare worked using the new view vw_consensus.
Added new general setting all_bdr_nodes, which when enabled allows the user to specify only the Initial Connection section that should point to any BDR node, and then LiveCompare will build the list of connections considering all active nodes in the BDR cluster. Please note that it requires that LiveCompare is able to connect to all BDR nodes using the node DSN as it can be seen in bdr.node_summary view.
Added new general setting consensus_mode, which determines which connections (or BDR nodes) are considered correct when data comparison finds a divergence. Can be simple_majority or quorum_based. If consensus_mode = quorum_based, then the new setting difference_required_quorum (values between 0.0 and 1.0, default 0.5) is considered. Default is consensus_mode = simple_majority.
Added new setting difference_tie_breakers, to help in cases where consensus can not determine correct connections or nodes in case of data divergence. Must be a comma-separated list of connection names, for example: difference_tie_breakers = node1,node2. In this example, either the sections node1 Connection and node2 Connections should be defined in the .ini file or bdr_all_nodes = on and only the Initial Connection is defined, while node1 and node2 should be valid BDR node names. Default is to not consider any connection as tie breaker.
Multi-way comparison also allows connection names other than “Left” and “Right” in the connection section name. Backward compatibility is kept so users can still define Left Connection and Right Connection, but now only 2 connections require definition of difference_tie_breakers as explained above. Previously the “Left” connection was always considered as tie breaker, i.e., as correct when automatic difference fix was enabled.
Multi-way comparison requires that only one of the connections is different than PostgreSQL, if any.
Implemented new setting stop_after_time to allow LiveCompare to be manually interrupted after a number of seconds. By default stop_after_time = 0 which means that LiveCompare will not automatically stop (only by manual Ctrl-c). LiveCompare can be manually stopped with Ctrl-c in all cases. Regardless of whether LiveCompare was manually or automatically interrupted, it can be resumed by passing the session ID as argument in the command line.
New table difference_fix stores the exact DML LiveCompare executed (or tried to execute) on each data connection, the time and the error (if any). Scripts applied_*.sql now contain the same applied DML too.
LiveCompare now stores table owner in table metadata.
Changed difference fix transaction timestamp from 2000-01-01 to 2010-01-01. This is valid only for BDR < 3.6.11, because starting from 3.6.11 the built-in function bdr.difference_fix_xact_set_avoid_conflict is used instead.
Fixed an issue where the bdr_livecompare replication origin was being unnecessarily created in BDR databases if automatic fix was disabled.
Fixed an issue where a comparison worker process might not finish cleanly.
CI: LiveCompare packages are now also built for Ubuntu 18.04 LTS.

LiveCompare now supports BLOB fields on Oracle versus Postgres comparison.
Ignored divergences: Users can stop difference re-check of certain differences by manually calling the function <livecompare_schema_name>.accept_divergence(session_id, table_name, difference_pk) in the Output PostgreSQL connection (RM8939).
Volatile divergences: If upon a difference re-check xmin has changed on an inconsistent row, then LiveCompare stops re-checking and marks the difference as Volatile (RM10964).
Overwritten divergences: After the automatic fix was applied, if upon a re-check xmin has changed, it means that the row was changed after we have fixed it. LiveCompare marks the divergence as Overwritten (RM10964).
Unfixable divergences: After the automatic fix was successfully applied, if upon a re-check xmin has not changed yet the divergence still remains, LiveCompare marks the divergence as Unfixable (RM10964).
LiveCompare now returns code = 0 when there are no divergences and return code > 0 when there are divergences.
Table Filter and Row Filter are now saved in table <livecompare_schema_name>.settings, alongside all General Settings.
New general setting difference_check_nap_time, to control how many seconds the difference check worker will sleep before starting a new difference check sprint. Default: 5 seconds.
When building the table list for BDR 3, LiveCompare now does not consider declarative partitions (RT66502).
LiveCompare now generates a DML script only for PostgreSQL connections.
When automatic fix is enabled (difference_mode = live_fix or difference_mode = offline_fix), it is required that the Right Connection is PostgreSQL.
Fixed security issue: table/column names and all literals are now properly quoted (RM12530).
Fixed issue when reserved words were used as column names (RM12530).
Fixed issue in column names in view vw_differences (RM12529).
Fixed an issue where table was being split unnecessarily in hash compare.

When building the table list for BDR 3, LiveCompare now considers only the intersection of replication sets that are associated with both BDR nodes from Left Connection and Right Connection (RT66502).
Fixed issue in building table list when partitioned tables or partitions were being considered (RT66499).
Improved log verbosity for initial steps of connection validation and building table list.
Fixed issues with encoding and string handling for Oracle.

LiveCompare is able to create and use a replication origin in BDR. If BDR version is 3.6.11 or higher, LiveCompare requires an user with bdr_superuser permissions or a PostgreSQL superuser to perform replication origin management using BDR functions bdr.difference_fix_origin_create(text), bdr.difference_fix_session_setup(text), bdr.difference_fix_session_reset() and bdr.difference_fix_xact_set_avoid_conflict(). If BDR version is 3.6.10 or lower, LiveCompare requires a PostgreSQL superuser to perform replication origin management using PostgreSQL functions. Otherwise LiveCompare does not try to manage replication origins. (RT66192 and RM11000).
LiveCompare is able to fetch replication origin information from each inconsistent row in BDR/pglogical. If BDR version is 3.6.11 or higher, LiveCompare requires an user with bdr_superuser permissions or a PostgreSQL superuser to fetch replication origin information from each row. If BDR version is 3.6.10 or lower or pglogical 3 is being used, LiveCompare requires an user with pglogical_superuser permissions or a PostgreSQL superuser to fetch replication origin information from each row. Otherwise LiveCompare does not try to fetch replication origin information (RM11971).
Remove partition from table list if parent table is already on table list (RT65920 and RM10994).
Always consider replication set tables when building table list for pglogical and BDR (RT65920).
Fixed issue when handling empty strings (RT65918 and RT65988).
Fixed issue in upgrading from 0.11.0 to 0.12.0 (RT65918 and RT65988).
Fixed issue in min PK and max PK value determination.

Changed default value of setting difference_fix_start_query to change role to the owner of the table, in the automatic fix transaction. This is done in order to prevent database users from gaining access to the privileged role used by LiveCompare by writing malicious triggers. As a result the user for the Right Connection needs to have ability to switch role to the table owner (RM11000).
Handled cases when a table is dropped or receive breaking schema changes after LiveCompare has built the table list and before LiveCompare has started the comparison round on the table. Now LiveCompare checks and updates metadata about the table before the comparison round (RT65918).
Fixed issue when executing pg_replication_origin_session_setup (RT65988).
Fixed issue in max PK value determination (RM11340).
Fixed performance issue when fetching metadata from tables, when there is a large number of tables in the database.

Each difference check is now logged in table difference_log, which provides useful information for analysis of each difference as it evolves over time. Each difference can pass through one of the following statuses:
- Detected (D): The difference was just detected. If difference_mode = live_nofix or difference_mode = live_fix, then LiveCompare will re-check the difference multiple times until it comes to a conclusion (see other statuses below), or at maximum N times (configurable via setting max_difference_check_attempts), waiting X seconds between each re-check (also configurable via setting min_time_between_difference_checks). If difference_mode = offline_nofix or difference_mode = offline_fix, then each difference found is immediately considered Permanent.
- Permanent (P): After having re-checked the difference for max_difference_check_attempts times, LiveCompare stops re-checking and marks the difference as Permanent. If difference_mode = offline_nofix or difference_mode =offline_fix`, then all differences are marked as permanent at the moment they are detected, because there is no re-check.
- Absent (A): If before having reached max_difference_check_attempts, LiveCompare finds that the difference does not exist anymore (the row is now consistent between both databases), then LiveCompare stops re-checking and marks the difference as Absent (in previous versions, LiveCompare would remove the register from the difference table).
- Not Allowed (N): The difference was detected, but LiveCompare is forbidden to automatically fix this difference because user has limited the types of differences that can be automatically fixed (via settings difference_statements and/or difference_allow_null_updates).
- Fixed (F): The difference was automatically fixed by LiveCompare in the Right Connection, by applying the DML from field difference_dml_right.
- Error (E): LiveCompare tried to fix the difference by applying the DML from field difference_dml_right against the Right Connection, but got an error. Error message is logged in field difference_dml_error.
Automatic schema changes for Output Connection: if user is pointing Output Connection to a database which was used in previous LiveCompare versions, LiveCompare will automatically handle the schema changes. For 0.11.0, LiveCompare re-creates the schema, but starting from 0.12.0, the implementation will only apply schema changes, keeping user data.
Created tables connections and settings to store session values coming from .ini file.
Improved row representation for each difference: whole row is now stored as JSON.
Storing xmin on extended columns of each different row.
Extended columns (ctid, xmin and origin) of each different row are now also stored as JSON.
Improved DML for text columns with multi-line values, columns with binary data and array columns.
Fixed an unhandled exception when table had no PK and columns with multi-line strings, null values or of type bytea. Or if table had a PK, but if PK had one of the mentioned situations.

Added new setting difference_mode which can be:
- offline_nofix: Tables being compared are not under load, so differences are not re-checked. Differences are reported but not fixed;
- offline_fix: Tables being compared are not under load, so differences are not re-checked. Differences are reported and fixed in the Right Connection when they are found;
- live_nofix (default): LiveCompare assumes that tables being compared are under load, so LiveCompare will re-check them to see if they are gone due to eventual consistency. Permanent differences are reported but not fixed.
- live_fix: LiveCompare assumes that tables being compared are under load, so LiveCompare will re-check them to see if they are gone due to eventual consistency. Differences are reported and fixed when they are marked as permanent.
Setting difference_recheck merged into difference_mode. Behavior of difference_recheck = off mapped to difference_mode = offline_nofix and difference_recheck = on mapped to difference_mode = live_fix.
Added new global setting difference_statements, which controls what kind of DML statements will be generated by LiveCompare in the DML scripts if difference_mode = offline_nofix or difference_mode = live_nofix, or automatically applied when difference_mode = offline_fix or difference_mode = live_fix. The value of difference_statements can be:
- all (default)
- inserts
- updates
- deletes
- inserts_updates
- inserts_deletes
- updates_deletes
Added new global setting difference_allow_null_updates (default on), which determines whether commands like UPDATE SET col = NULL will be allowed in difference report or automatic fix.
Added new global setting difference_fix_replication_origin, automatically set by default to bdr_livecompare for pglogical 3 and/or BDR 3 comparisons if not manually set. LiveCompare will create the specific replication origin in the Right Connection if it doesn’t exist, and apply all automatic DML fixes using this replication origin when difference_mode = live_fix or difference_mode = offline_fix. Note that the replication origin that LiveCompare creates is not dropped to allow verification after the comparison, but if needed the replication origin can then be dropped by using SELECT pg_replication_origin_drop('<value of setting difference_fix_replication_origin>');.
Added new global setting difference_fix_start_query, which is executed at the beginning of each transaction to automatically fix differences on the Right Connection. For BDR 3.6.7 and above, if difference_fix_start_query is empty, LiveCompare automatically sets difference_fix_start_query = SET LOCAL bdr.xact_replication = off;. LiveCompare also automatically sets difference_fix_start_query to make the difference fix transaction use the replication origin specified in difference_fix_replication_origin.
Added new Connection setting start_query, which can be used to execute any arbitrary query each time a connection is open.
Added new global setting show_progress_bars (default on), which determines whether or not progress bars should be shown in the console output. Useful for batch executions.
On Postgres comparisons, each difference found now also stores the ctid of the row. If BDR 3 or pglogical 3 is being used, then each difference found also stores the replication origin of the xmin of the row.
Generated DML scripts will always put all DML inside a single transaction. If difference_fix_start_query is defined (either manually or automatically), then it is added at the beginning of the transaction.
Fixed an issue with the global progress bar not being removed at the end of the execution.
Fixed a bug where Output database existence was not being checked.

Support to Oracle databases on Left or Right connections. Oracle Instant Client and Python module need to be installed separately, but are not required for Postgres databases. LiveCompare works without having connectivity to Oracle.
Currently row hashes and table splitting hashes are only allowed in PostgreSQL versus PostgreSQL comparisons. A new setting full_comparison_mode will be automatically set to on if a technology other than PostgreSQL is used in any of the connections. If user wants to disable hash usage even on Postgres versus Postgres, full_comparison_mode = on can be explictly defined in the configuration file.
Support to BDR 1 and 2. When logical_replication_mode = bdr, it is possible to define connections with node_name and filter tables with replication_sets.
Row hash needs to be md5() for both Left Connection and Right Connection if any of those connections is on PostgreSQL < 11. Otherwise, both connections use hashtextextended(). This allows for mixed PostgreSQL version comparison (9.4 versus 12, for example).
Setting logical_replication_mode imposes a validation for PostgreSQL version and extension existence on Initial Connection and Left Connection. Note that table list is built from Left Connection. But on Right Connection, only connectivity is checked. This allows for mixed technology comparison (PostgreSQL versus Oracle, BDR versus PostgreSQL, BDR 2 versus BDR 3, etc).
New setting difference_recheck (boolean, default on) that allow users to enable or disable difference re-checking.
Table schema differences (column names and column data types) are logged into the reporting database (table tables) for later analysis.
Left and Right connection information is being logged into the reporting database (table sessions) for later analysis.
Fixed a bug in difference checking in a corner case where tables have some duplicate rows.
Fixed a bug in difference reporting if a table have more rows in the Right Connection.
Fixed a bug in difference reporting if there are any temporary differences.

Fixed fetching of a single row (to check inconsistency) when table has PK with multiple fields.

Fixed handling of tables without rows.
Better handling of empty sections.

Changed logging component.

Bug fixes:
- Support to sorting data types without ordering operator.
- Using md5() as a record hash when hashtextextended() is not available (PG <= 10).
- When configuration file does not exist, show an appropriate message.

Preparations for including into 2ndQuadrant CI pipeline.

Support to DSN to specify a connection.
Improved table and row filter.
Support to different types of logical replication:
- native logical replication
- pglogical
- bdr
BDR support
- Allow user to specify node names for connections.
- Allow user to specify replication sets as table filters.
Created different test scenarios.

Improved hash: using hashtext() and hashtextextended() instead of md5().
Fetches are performed using prepared statements.

Initial support for PostgreSQL.
Initial implementation of the standalone mode.