Features in detail¶

In this section we present several Barman features and discuss their applicability and the configuration required to use them.

This list is not exhaustive, as many scenarios can be created working on the Barman configuration. Nevertheless, it is useful to discuss common patterns.

Backup features¶

Incremental backup¶

Barman implements file-level incremental backup. Incremental backup is a type of full periodic backup which only saves data changes from the latest full backup available in the catalog for a specific PostgreSQL server. It must not be confused with differential backup, which is implemented by WAL continuous archiving.

NOTE: Block level incremental backup will be available in future versions.

IMPORTANT: The reuse_backup option can’t be used with the postgres backup method at this time.

The main goals of incremental backups in Barman are:

Reduce the time taken for the full backup process
Reduce the disk space occupied by several periodic backups (data deduplication)

This feature heavily relies on rsync and [hard links][8], which must therefore be supported by both the underlying operating system and the file system where the backup data resides.

The main concept is that a subsequent base backup will share those files that have not changed since the previous backup, leading to relevant savings in disk usage. This is particularly true of VLDB contexts and of those databases containing a high percentage of read-only historical tables.

Barman implements incremental backup through a global/server option called reuse_backup, that transparently manages the barman backup command. It accepts three values:

off: standard full backup (default)
link: incremental backup, by reusing the last backup for a server and creating a hard link of the unchanged files (for backup space and time reduction)
copy: incremental backup, by reusing the last backup for a server and creating a copy of the unchanged files (just for backup time reduction)

The most common scenario is to set reuse_backup to link, as follows:

reuse_backup = link

Setting this at global level will automatically enable incremental backup for all your servers.

As a final note, users can override the setting of the reuse_backup option through the --reuse-backup runtime option for the barman backup command. Similarly, the runtime option accepts three values: off, link and copy. For example, you can run a one-off incremental backup as follows:

barman backup --reuse-backup=link <server_name>

Limiting bandwidth usage¶

It is possible to limit the usage of I/O bandwidth through the bandwidth_limit option (global/per server), by specifying the maximum number of kilobytes per second. By default it is set to 0, meaning no limit.

IMPORTANT: the bandwidth_limit and the tablespace_bandwidth_limit options are not supported with the postgres backup method

In case you have several tablespaces and you prefer to limit the I/O workload of your backup procedures on one or more tablespaces, you can use the tablespace_bandwidth_limit option (global/per server):

tablespace_bandwidth_limit = tbname:bwlimit[, tbname:bwlimit, ...]

The option accepts a comma separated list of pairs made up of the tablespace name and the bandwidth limit (in kilobytes per second).

When backing up a server, Barman will try and locate any existing tablespace in the above option. If found, the specified bandwidth limit will be enforced. If not, the default bandwidth limit for that server will be applied.

Network Compression¶

It is possible to reduce the size of transferred data using compression. It can be enabled using the network_compression option (global/per server):

IMPORTANT: the network_compression option is not available with the postgres backup method.

network_compression = true|false

Setting this option to true will enable data compression during network transfers (for both backup and recovery). By default it is set to false.

Concurrent Backup and backup from a standby¶

Normally, during backup operations, Barman uses PostgreSQL native functions pg_start_backup and pg_stop_backup for exclusive backup. These operations are not allowed on a read-only standby server.

Barman is also capable of performing backups of PostgreSQL from 9.2 or greater database servers in a concurrent way, primarily through the backup_options configuration parameter. 1

This introduces a new architecture scenario with Barman: backup from a standby server, using rsync.

IMPORTANT: Concurrent backup requires users of PostgreSQL 9.2, 9.3, 9.4, and 9.5 to install the pgespresso open source extension on every PostgreSQL server of the cluster. For more detailed information and the source code, please visit the [pgespresso extension website][9]. Barman supports the new API introduced in PostgreSQL 9.6. This removes the requirement of the pgespresso extension to perform concurrent backups from this version of PostgreSQL.

By default, backup_options is transparently set to exclusive_backup for backwards compatibility reasons. Users of PostgreSQL 9.6 and later versions should set backup_options to concurrent_backup.

IMPORTANT: When PostgreSQL 9.5 is declared EOL by the Community, Barman will by default set backup_options to concurrent_backup. Support for pgespresso will be ceased then.

When backup_options is set to concurrent_backup, Barman activates the concurrent backup mode for a server and follows these two simple rules:

ssh_command must point to the destination Postgres server
conninfo must point to a database on the destination Postgres database. Using PostgreSQL 9.2, 9.3, 9.4, and 9.5, pgespresso must be correctly installed through CREATE EXTENSION. Using 9.6 or greater, concurrent backups are executed through the Postgres native API (which requires an active connection from the start to the stop of the backup).

IMPORTANT: In case of a concurrent backup, currently Barman cannot determine whether the closing WAL file of a full backup has actually been shipped - opposite of an exclusive backup where PostgreSQL itself makes sure that the WAL file is correctly archived. Be aware that the full backup cannot be considered consistent until that WAL file has been received and archived by Barman. Barman 2.5 introduces a new state, called WAITING_FOR_WALS, which is managed by the check-backup command (part of the ordinary maintenance job performed by the cron command). From Barman 2.10, you can use the --wait option with barman backup command.

Current limitations on backup from standby¶

Barman currently requires that backup data (base backups and WAL files) come from one server only. Therefore, in case of backup from a standby, you should point to the standby server:

conninfo
streaming_conninfo, if you use postgres as backup_method and/or rely on WAL streaming
ssh_command, if you use rsync as backup_method

IMPORTANT: From Barman 2.8, backup from a standby is supported only for PostgreSQL 9.4 or higher (versions 9.4 and 9.5 require pgespresso). Support for 9.2 and 9.3 is deprecated.

The recommended and simplest way is to setup WAL streaming with replication slots directly from the standby, which requires PostgreSQL 9.4. This means:

configure streaming_archiver = on, as described in the “WAL streaming” section, including “Replication slots”
disable archiver = on

Alternatively, from PostgreSQL 9.5 you can decide to archive from the standby only using archive_command with archive_mode = always and by disabling WAL streaming.

NOTE: Unfortunately, it is not currently possible to enable both WAL archiving and streaming from the standby due to the way Barman performs WAL duplication checks and an undocumented behaviours in all versions of PostgreSQL.

Immediate checkpoint¶

Before starting a backup, Barman requests a checkpoint, which generates additional workload. Normally that checkpoint is throttled according to the settings for workload control on the PostgreSQL server, which means that the backup could be delayed.

This default behaviour can be changed through the immediate_checkpoint configuration global/server option (set to false by default).

If immediate_checkpoint is set to true, PostgreSQL will not try to limit the workload, and the checkpoint will happen at maximum speed, starting the backup as soon as possible.

At any time, you can override the configuration option behaviour, by issuing barman backup with any of these two options:

--immediate-checkpoint, which forces an immediate checkpoint;
--no-immediate-checkpoint, which forces to wait for the checkpoint to happen.

Local backup¶

DISCLAIMER: This feature is not recommended for production usage, as Barman and PostgreSQL reside on the same server and are part of the same single point of failure. Some of 2ndQuadrant customers have requested to add support for local backup to Barman to be used under specific circumstances and, most importantly, under the 24/7 production service delivered by the company. Using this feature currently requires installation from sources, or to customise the environment for the postgres user in terms of permissions as well as logging and cron configurations.

Under special circumstances, Barman can be installed on the same server where the PostgreSQL instance resides, with backup data stored on a separate volume from PGDATA and, where applicable, tablespaces. Usually, these volumes reside on network storage appliances, with filesystems like NFS.

This architecture is not endorsed by 2ndQuadrant. For an enhanced business continuity experience of PostgreSQL, with better results in terms of RPO and RTO, 2ndQuadrant still recommends the shared nothing architecture with a remote installation of Barman, capable of acting like a witness server for replication and monitoring purposes.

The only requirement for local backup is that Barman runs with the same user as the PostgreSQL server, which is normally postgres. Given that the Community packages by default install Barman under the barman user, this use case requires manual installation procedures that include:

cron configurations
log configurations, including logrotate

In order to use local backup for a given server in Barman, you need to set backup_method to local-rsync. The feature is essentially identical to its rsync equivalent, which relies on SSH instead and operates remotely. With local-rsync file system copy is performed issuing rsync commands locally (for this reason it is required that Barman runs with the same user as PostgreSQL).

An excerpt of configuration for local backup for a server named local-pg13 is:

[local-pg13]
description = "Local PostgreSQL 13"
backup_method = local-rsync
...

Archiving features¶

WAL compression¶

The barman cron command will compress WAL files if the compression option is set in the configuration file. This option allows five values:

bzip2: for Bzip2 compression (requires the bzip2 utility)
gzip: for Gzip compression (requires the gzip utility)
pybzip2: for Bzip2 compression (uses Python’s internal compression module)
pygzip: for Gzip compression (uses Python’s internal compression module)
pigz: for Pigz compression (requires the pigz utility)
custom: for custom compression, which requires you to set the following options as well: - custom_compression_filter: a compression filter - custom_decompression_filter: a decompression filter

NOTE: All methods but pybzip2 and pygzip require barman archive-wal to fork a new process.

Synchronous WAL streaming¶

IMPORTANT: This feature is available only from PostgreSQL 9.5 and above.

Barman can also reduce the Recovery Point Objective to zero, by collecting the transaction WAL files like a synchronous standby server would.

To configure such a scenario, the Barman server must be configured to archive WALs via the streaming connection, and the receive-wal process should figure as a synchronous standby of the PostgreSQL server.

First of all, you need to retrieve the application name of the Barman receive-wal process with the show-server command:

barman@backup$ barman show-server pg|grep streaming_archiver_name
    streaming_archiver_name: barman_receive_wal

Then the application name should be added to the postgresql.conf file as a synchronous standby:

synchronous_standby_names = 'barman_receive_wal'

IMPORTANT: this is only an example of configuration, to show you that Barman is eligible to be a synchronous standby node. We are not suggesting to use ONLY Barman. You can read [“Synchronous Replication”][synch] from the PostgreSQL documentation for further information on this topic.

The PostgreSQL server needs to be restarted for the configuration to be reloaded.

If the server has been configured correctly, the replication-status command should show the receive_wal process as a synchronous streaming client:

[root@backup ~]# barman replication-status pg
Status of streaming clients for server 'pg':
  Current xlog location on master: 0/9000098
  Number of streaming clients: 1

  1. #1 Sync WAL streamer
     Application name: barman_receive_wal
     Sync stage      : 3/3 Remote write
     Communication   : TCP/IP
     IP Address      : 139.59.135.32 / Port: 58262 / Host: -
     User name       : streaming_barman
     Current state   : streaming (sync)
     Replication slot: barman
     WAL sender PID  : 2501
     Started at      : 2016-09-16 10:33:01.725883+00:00
     Sent location   : 0/9000098 (diff: 0 B)
     Write location  : 0/9000098 (diff: 0 B)
     Flush location  : 0/9000098 (diff: 0 B)

Catalog management features¶

Minimum redundancy safety¶

You can define the minimum number of periodic backups for a PostgreSQL server, using the global/per server configuration option called minimum_redundancy, by default set to 0.

By setting this value to any number greater than 0, Barman makes sure that at any time you will have at least that number of backups in a server catalog.

This will protect you from accidental barman delete operations.

IMPORTANT: Make sure that your retention policy settings do not collide with minimum redundancy requirements. Regularly check Barman’s log for messages on this topic.

Retention policies¶

Barman supports retention policies for backups.

A backup retention policy is a user-defined policy that determines how long backups and related archive logs (Write Ahead Log segments) need to be retained for recovery procedures.

Based on the user’s request, Barman retains the periodic backups required to satisfy the current retention policy and any archived WAL files required for the complete recovery of those backups.

Barman users can define a retention policy in terms of backup redundancy (how many periodic backups) or a recovery window (how long).

Retention policy based on redundancy: In a redundancy based retention policy, the user determines how many periodic backups to keep. A redundancy-based retention policy is contrasted with retention policies that use a recovery window.
Retention policy based on recovery window: A recovery window is one type of Barman backup retention policy, in which the DBA specifies a period of time and Barman ensures retention of backups and/or archived WAL files required for point-in-time recovery to any time during the recovery window. The interval always ends with the current time and extends back in time for the number of days specified by the user. For example, if the retention policy is set for a recovery window of seven days, and the current time is 9:30 AM on Friday, Barman retains the backups required to allow point-in-time recovery back to 9:30 AM on the previous Friday.

Scope¶

Retention policies can be defined for:

PostgreSQL periodic base backups: through the retention_policy configuration option
Archive logs, for Point-In-Time-Recovery: through the wal_retention_policy configuration option

IMPORTANT: In a temporal dimension, archive logs must be included in the time window of periodic backups.

There are two typical use cases here: full or partial point-in-time recovery.

Full point in time recovery scenario:: Base backups and archive logs share the same retention policy, allowing you to recover at any point in time from the first available backup.
Partial point in time recovery scenario:: Base backup retention policy is wider than that of archive logs, for example allowing users to keep full, weekly backups of the last 6 months, but archive logs for the last 4 weeks (granting to recover at any point in time starting from the last 4 periodic weekly backups).

IMPORTANT: Currently, Barman implements only the full point in time recovery scenario, by constraining the wal_retention_policy option to main.

How they work¶

Retention policies in Barman can be:

automated: enforced by barman cron
manual: Barman simply reports obsolete backups and allows you to delete them

IMPORTANT: Currently Barman does not implement manual enforcement. This feature will be available in future versions.

Configuration and syntax¶

Retention policies can be defined through the following configuration options:

retention_policy: for base backup retention
wal_retention_policy: for archive logs retention
retention_policy_mode: can only be set to auto (retention policies are automatically enforced by the barman cron command)

These configuration options can be defined both at a global level and a server level, allowing users maximum flexibility on a multi-server environment.

Syntax for `retention_policy`¶

The general syntax for a base backup retention policy through retention_policy is the following:

retention_policy = {REDUNDANCY value | RECOVERY WINDOW OF value {DAYS | WEEKS | MONTHS}}

Where:

syntax is case insensitive
value is an integer and is > 0
in case of redundancy retention policy: - value must be greater than or equal to the server minimum redundancy level (if that value is not assigned, a warning is generated) - the first valid backup is the value-th backup in a reverse ordered time series
in case of recovery window policy: - the point of recoverability is: current time - window - the first valid backup is the first available backup before the point of recoverability; its value in a reverse ordered time series must be greater than or equal to the server minimum redundancy level (if it is not assigned to that value and a warning is generated)

By default, retention_policy is empty (no retention enforced).

Syntax for `wal_retention_policy`¶

Currently, the only allowed value for wal_retention_policy is the special value main, that maps the retention policy of archive logs to that of base backups.

Hook scripts¶

Barman allows a database administrator to run hook scripts on these two events:

before and after a backup
before and after the deletion of a backup
before and after a WAL file is archived
before and after a WAL file is deleted

There are two types of hook scripts that Barman can manage:

standard hook scripts
retry hook scripts

The only difference between these two types of hook scripts is that Barman executes a standard hook script only once, without checking its return code, whereas a retry hook script may be executed more than once, depending on its return code.

Specifically, when executing a retry hook script, Barman checks the return code and retries indefinitely until the script returns either SUCCESS (with standard return code 0), or ABORT_CONTINUE (return code 62), or ABORT_STOP (return code 63). Barman treats any other return code as a transient failure to be retried. Users are given more power: a hook script can control its workflow by specifying whether a failure is transient. Also, in case of a ‘pre’ hook script, by returning ABORT_STOP, users can request Barman to interrupt the main operation with a failure.

Hook scripts are executed in the following order:

The standard ‘pre’ hook script (if present)
The retry ‘pre’ hook script (if present)
The actual event (i.e. backup operation, or WAL archiving), if retry ‘pre’ hook script was not aborted with ABORT_STOP
The retry ‘post’ hook script (if present)
The standard ‘post’ hook script (if present)

The output generated by any hook script is written in the log file of Barman.

NOTE: Currently, ABORT_STOP is ignored by retry ‘post’ hook scripts. In these cases, apart from logging an additional warning, ABORT_STOP will behave like ABORT_CONTINUE.

Backup scripts¶

These scripts can be configured with the following global configuration options (which can be overridden on a per server basis):

pre_backup_script: hook script executed before a base backup, only once, with no check on the exit code
pre_backup_retry_script: retry hook script executed before a base backup, repeatedly until success or abort
post_backup_retry_script: retry hook script executed after a base backup, repeatedly until success or abort
post_backup_script: hook script executed after a base backup, only once, with no check on the exit code

The script definition is passed to a shell and can return any exit code. Only in case of a retry script, Barman checks the return code (see the hook script section).

The shell environment will contain the following variables:

BARMAN_BACKUP_DIR: backup destination directory
BARMAN_BACKUP_ID: ID of the backup
BARMAN_CONFIGURATION: configuration file used by Barman
BARMAN_ERROR: error message, if any (only for the post phase)
BARMAN_PHASE: phase of the script, either pre or post
BARMAN_PREVIOUS_ID: ID of the previous backup (if present)
BARMAN_RETRY: 1 if it is a retry script, 0 if not
BARMAN_SERVER: name of the server
BARMAN_STATUS: status of the backup
BARMAN_VERSION: version of Barman

Backup delete scripts¶

Version 2.4 introduces pre and post backup delete scripts.

As previous scripts, backup delete scripts can be configured within global configuration options, and it is possible to override them on a per server basis:

pre_delete_script: hook script launched before the deletion of a backup, only once, with no check on the exit code
pre_delete_retry_script: retry hook script executed before the deletion of a backup, repeatedly until success or abort
post_delete_retry_script: retry hook script executed after the deletion of a backup, repeatedly until success or abort
post_delete_script: hook script launched after the deletion of a backup, only once, with no check on the exit code

The script is executed through a shell and can return any exit code. Only in case of a retry script, Barman checks the return code (see the upper section).

Delete scripts uses the same environmental variables of a backup script, plus:

BARMAN_NEXT_ID: ID of the next backup (if present)

WAL archive scripts¶

Similar to backup scripts, archive scripts can be configured with global configuration options (which can be overridden on a per server basis):

pre_archive_script: hook script executed before a WAL file is archived by maintenance (usually barman cron), only once, with no check on the exit code
pre_archive_retry_script: retry hook script executed before a WAL file is archived by maintenance (usually barman cron), repeatedly until it is successful or aborted
post_archive_retry_script: retry hook script executed after a WAL file is archived by maintenance, repeatedly until it is successful or aborted
post_archive_script: hook script executed after a WAL file is archived by maintenance, only once, with no check on the exit code

The script is executed through a shell and can return any exit code. Only in case of a retry script, Barman checks the return code (see the upper section).

Archive scripts share with backup scripts some environmental variables:

BARMAN_CONFIGURATION: configuration file used by Barman
BARMAN_ERROR: error message, if any (only for the post phase)
BARMAN_PHASE: phase of the script, either pre or post
BARMAN_SERVER: name of the server

Following variables are specific to archive scripts:

BARMAN_SEGMENT: name of the WAL file
BARMAN_FILE: full path of the WAL file
BARMAN_SIZE: size of the WAL file
BARMAN_TIMESTAMP: WAL file timestamp
BARMAN_COMPRESSION: type of compression used for the WAL file

WAL delete scripts¶

Version 2.4 introduces pre and post WAL delete scripts.

Similarly to the other hook scripts, wal delete scripts can be configured with global configuration options, and is possible to override them on a per server basis:

pre_wal_delete_script: hook script executed before the deletion of a WAL file
pre_wal_delete_retry_script: retry hook script executed before the deletion of a WAL file, repeatedly until it is successful or aborted
post_wal_delete_retry_script: retry hook script executed after the deletion of a WAL file, repeatedly until it is successful or aborted
post_wal_delete_script: hook script executed after the deletion of a WAL file

The script is executed through a shell and can return any exit code. Only in case of a retry script, Barman checks the return code (see the upper section).

WAL delete scripts use the same environmental variables as WAL archive scripts.

Recovery scripts¶

Version 2.4 introduces pre and post recovery scripts.

As previous scripts, recovery scripts can be configured within global configuration options, and is possible to override them on a per server basis:

pre_recovery_script: hook script launched before the recovery of a backup, only once, with no check on the exit code
pre_recovery_retry_script: retry hook script executed before the recovery of a backup, repeatedly until success or abort
post_recovery_retry_script: retry hook script executed after the recovery of a backup, repeatedly until success or abort
post_recovery_script: hook script launched after the recovery of a backup, only once, with no check on the exit code

The script is executed through a shell and can return any exit code. Only in case of a retry script, Barman checks the return code (see the upper section).

Recovery scripts uses the same environmental variables of a backup script, plus:

BARMAN_DESTINATION_DIRECTORY: the directory where the new instance is recovered
BARMAN_TABLESPACES: tablespace relocation map (JSON, if present)
BARMAN_REMOTE_COMMAND: secure shell command used by the recovery (if present)
BARMAN_RECOVER_OPTIONS: recovery additional options (JSON, if present)

Customization¶

Lock file directory¶

Barman allows you to specify a directory for lock files through the barman_lock_directory global option.

Lock files are used to coordinate concurrent work at global and server level (for example, cron operations, backup operations, access to the WAL archive, and so on.).

By default (for backward compatibility reasons), barman_lock_directory is set to barman_home.

TIP: Users are encouraged to use a directory in a volatile partition, such as the one dedicated to run-time variable data (e.g. /var/run/barman).

Binary paths¶

As of version 1.6.0, Barman allows users to specify one or more directories where Barman looks for executable files, using the global/server option path_prefix.

If a path_prefix is provided, it must contain a list of one or more directories separated by colon. Barman will search inside these directories first, then in those specified by the PATH environment variable.

By default the path_prefix option is empty.

Integration with cluster management systems¶

Barman has been designed for integration with standby servers (with streaming replication or traditional file based log shipping) and high availability tools like [repmgr][repmgr].

From an architectural point of view, PostgreSQL must be configured to archive WAL files directly to the Barman server. Barman, thanks to the get-wal framework, can also be used as a WAL hub. For this purpose, you can use the barman-wal-restore script, part of the barman-cli package, with all your standby servers.

The replication-status command allows you to get information about any streaming client attached to the managed server, in particular hot standby servers and WAL streamers.

Parallel jobs¶

By default, Barman uses only one worker for file copy during both backup and recover operations. Starting from version 2.2, it is possible to customize the number of workers that will perform file copy. In this case, the files to be copied will be equally distributed among all parallel workers.

It can be configured in global and server scopes, adding these in the corresponding configuration file:

parallel_jobs = n

where n is the desired number of parallel workers to be used in file copy operations. The default value is 1.

In any case, users can override this value at run-time when executing backup or recover commands. For example, you can use 4 parallel workers as follows:

barman backup --jobs 4 server1

Or, alternatively:

barman backup --j 4 server1

Please note that this parallel jobs feature is only available for servers configured through rsync/SSH. For servers configured through streaming protocol, Barman will rely on pg_basebackup which is currently limited to only one worker.

Geographical redundancy¶

It is possible to set up cascading backup architectures with Barman, where the source of a backup server is a Barman installation rather than a PostgreSQL server.

This feature allows users to transparently keep geographically distributed copies of PostgreSQL backups.

In Barman jargon, a backup server that is connected to a Barman installation rather than a PostgreSQL server is defined passive node. A passive node is configured through the primary_ssh_command option, available both at global (for a full replica of a primary Barman installation) and server level (for mixed scenarios, having both direct and passive servers).

Sync information¶

The barman sync-info command is used to collect information regarding the current status of a Barman server that is useful for synchronisation purposes. The available syntax is the following:

barman sync-info [--primary] <server_name> [<last_wal> [<last_position>]]

The command returns a JSON object containing:

A map with all the backups having status DONE for that server
A list with all the archived WAL files
The configuration for the server
The last read position (in the xlog database file)
the name of the last read WAL file

The JSON response contains all the required information for the synchronisation between the master and a passive node.

If --primary is specified, the command is executed on the defined primary node, rather than locally.

Configuration¶

Configuring a server as passive node is a quick operation. Simply add to the server configuration the following option:

primary_ssh_command = ssh barman@primary_barman

This option specifies the SSH connection parameters to the primary server, identifying the source of the backup data for the passive server.

Node synchronisation¶

When a node is marked as passive it is treated in a special way by Barman:

it is excluded from standard maintenance operations
direct operations to PostgreSQL are forbidden, including barman backup

Synchronisation between a passive server and its primary is automatically managed by barman cron which will transparently invoke:

barman sync-info --primary, in order to collect synchronisation information
barman sync-backup, in order to create a local copy of every backup that is available on the primary node
barman sync-wals, in order to copy locally all the WAL files available on the primary node

Manual synchronisation¶

Although barman cron automatically manages passive/primary node synchronisation, it is possible to manually trigger synchronisation of a backup through:

barman sync-backup <server_name> <backup_id>

Launching sync-backup barman will use the primary_ssh_command to connect to the master server, then if the backup is present on the remote machine, will begin to copy all the files using rsync. Only one single synchronisation process per backup is allowed.

WAL files also can be synchronised, through:

barman sync-wals <server_name>

1: Concurrent backup is a technology that has been available in PostgreSQL since version 9.2, through the streaming replication protocol (for example, using a tool like pg_basebackup).

Features in detail¶

Backup features¶

Incremental backup¶

Limiting bandwidth usage¶

Network Compression¶

Concurrent Backup and backup from a standby¶

Current limitations on backup from standby¶

Immediate checkpoint¶

Local backup¶

Archiving features¶

WAL compression¶

Synchronous WAL streaming¶

Catalog management features¶

Minimum redundancy safety¶

Retention policies¶

Scope¶

How they work¶

Configuration and syntax¶

Syntax for `retention_policy`¶

Syntax for `wal_retention_policy`¶

Hook scripts¶

Backup scripts¶

Backup delete scripts¶

WAL archive scripts¶

WAL delete scripts¶

Recovery scripts¶

Customization¶

Lock file directory¶

Binary paths¶

Integration with cluster management systems¶

Parallel jobs¶

Geographical redundancy¶

Sync information¶

Configuration¶

Node synchronisation¶

Manual synchronisation¶

Previous topic

Next topic

Table of Contents

Features in detail¶

Backup features¶

Incremental backup¶

Limiting bandwidth usage¶

Network Compression¶

Concurrent Backup and backup from a standby¶

Current limitations on backup from standby¶

Immediate checkpoint¶

Local backup¶

Archiving features¶

WAL compression¶

Synchronous WAL streaming¶

Catalog management features¶

Minimum redundancy safety¶

Retention policies¶

Scope¶

How they work¶

Configuration and syntax¶

Syntax for retention_policy¶

Syntax for wal_retention_policy¶

Hook scripts¶

Backup scripts¶

Backup delete scripts¶

WAL archive scripts¶

WAL delete scripts¶

Recovery scripts¶

Customization¶

Lock file directory¶

Binary paths¶

Integration with cluster management systems¶

Parallel jobs¶

Geographical redundancy¶

Sync information¶

Configuration¶

Node synchronisation¶

Manual synchronisation¶

Syntax for `retention_policy`¶

Syntax for `wal_retention_policy`¶