Server commands

As we said in the previous section, server commands work directly on a PostgreSQL server or on its area in Barman, and are useful to check its status, perform maintenance operations, take backups, and manage the WAL archive.

archive-wal

The archive-wal command execute maintenance operations on WAL files for a given server. This operations include processing of the WAL files received from the streaming connection or from the archive_command or both.

Important

The archive-wal command, even if it can be directly invoked, is designed to be started from the cron general command.

backup

The backup command takes a full backup (base backup) of a given server. It has several options that let you override the corresponding configuration parameter for the new backup. For more information, consult the manual page.

You can perform a full backup for a given server with:

barman backup <server_name>

Tip

You can use barman backup all to sequentially backup all your configured servers.

Barman 2.10 introduces the -w /--wait option for the backup command. When set, Barman temporarily saves the state of the backup to WAITING_FOR_WALS , then waits for all the required WAL files to be archived before setting the state to DONE and proceeding with post-backup hook scripts. If the --wait-timeout option is provided, Barman will stop waiting for WAL files after the specified number of seconds, and the state will remain in WAITING_FOR_WALS .The cron command will continue to check that missing WAL files are archived, then label the backup as DONE .

check

You can check the connection to a given server and the configuration coherence with the check command:

barman check <server_name>

Tip

You can use barman check all to check all your configured servers.

Important

The check command is probably the most critical feature that Barman implements. We recommend to integrate it with your alerting and monitoring infrastructure. The –nagios option allows you to easily create a plugin for Nagios/Icinga.

generate-manifest

This command is useful when backup is created remotely and pg_basebackup is not involved and backup_manifest file does not exist in backup. It will generate backup_manifest file from backup_id using backup in barman server. If the file already exist, generation command will abort.

Command example: bash barman generate-manifest <server_name> <backup_id> Either backup_id backup id shortcuts can be used.

This command can also be used as post_backup hook script as follows: bash post_backup_script=barman generate-manifest ${BARMAN_SERVER} ${BARMAN_BACKUP_ID}

get-wal

Barman allows users to request any xlog file from its WAL archive through the get-wal command:

barman get-wal [-o OUTPUT_DIRECTORY ]() <server_name> <wal_id>

If the requested WAL file is found in the server archive, the uncompressed content will be returned to STDOUT , unless otherwise specified.

The following options are available for the get-wal command:

• -o allows users to specify a destination directory where Barman will deposit the requested WAL file

• -j will compress the output using bzip2 algorithm

• -x will compress the output using gzip algorithm

• -p SIZE peeks from the archive up to WAL files, starting from the requested file

It is possible to use get-wal during a recovery operation, transforming the Barman server into a WAL hub for your servers. This can be automatically achieved by adding the get-wal value to the recovery_options global/server configuration option:

recovery_options = get-wal

recovery_options is a global/server option that accepts a list of comma separated values. If the keyword get-wal is present during a recovery operation, Barman will prepare the recovery configuration by setting the restore_command so that barman get-wal is used to fetch the required WAL files. Similarly, one can use the --get-wal option for the recover command at run-time.

If get-wal is set in recovery_options but not required during a recovery operation then the --no-get-wal option can be used with the recover command to disable the get-wal recovery option.

This is an example of a restore_command for a local recovery:

restore_command = sudo -u barman barman get-wal SERVER %f > %p

Please note that the get-wal command should always be invoked as barman user, and that it requires the correct permission to read the WAL files from the catalog. This is the reason why we are using sudo -u barman in the example.

Setting recovery_options to get-wal for a remote recovery will instead generate a restore_command using the barman-wal-restore script. barman-wal-restore is a more resilient shell script which manages SSH connection errors.

This script has many useful options such as the automatic compression and decompression of the WAL files and the peek feature, which allows you to retrieve the next WAL files while PostgreSQL is applying one of them. It is an excellent way to optimise the bandwidth usage between PostgreSQL and Barman.

barman-wal-restore is available in the barman-cli package.

This is an example of a restore_command for a remote recovery:

restore_command = barman-wal-restore -U barman backup SERVER %f %p

Since it uses SSH to communicate with the Barman server, SSH key authentication is required for the postgres user to login as barman on the backup server.

You can check that barman-wal-restore can connect to the Barman server, and that the required PostgreSQL server is configured in Barman to send WAL files with the following command:

barman-wal-restore --test backup pg DUMMY DUMMY

Where backup is the host where Barman is installed, pg is the name of the PostgreSQL server as configured in Barman and DUMMY is a placeholder (barman-wal-restore requires two argument for the WAL file name and destination directory, which are ignored). For more information on the barman-wal-restore command, type man barman-wal-restore on the PostgreSQL server.

list-backups

You can list the catalog of available backups for a given server with:

barman list-backups <server_name>

Tip

You can request a full list of the backups of all servers using all as the server name.

To have a machine-readable output you can use the --minimal option.

rebuild-xlogdb

At any time, you can regenerate the content of the WAL archive for a specific server (or every server, using the all shortcut). The WAL archive is contained in the xlog.db file and every server managed by Barman has its own copy.

The xlog.db file can be rebuilt with the rebuild-xlogdb command. This will scan all the archived WAL files and regenerate the metadata for the archive.

For example:

barman rebuild-xlogdb <server_name>

receive-wal

This command manages the receive-wal process, which uses the streaming protocol to receive WAL files from the PostgreSQL streaming connection.

receive-wal process management

If the command is run without options, a receive-wal process will be started. This command is based on the pg_receivewal PostgreSQL command.

barman receive-wal <server_name>

Note

The receive-wal command is a foreground process.

If the command is run with the --stop option, the currently running receive-wal process will be stopped.

The receive-wal process uses a status file to track last written record of the transaction log. When the status file needs to be cleaned, the --reset option can be used.

Important

If you are not using replication slots, you rely on the value of wal_keep_segments (or wal_keep_size from PostgreSQL version 13.0 onwards). Be aware that under high peaks of workload on the database, the receive-wal process might fall behind and go out of sync. As a precautionary measure, Barman currently requires that users manually execute the command with the –reset option, to avoid making wrong assumptions.

Replication slot management

The receive-wal process is also useful to create or drop the replication slot needed by Barman for its WAL archiving procedure.

With the --create-slot option, the replication slot named after the slot_name configuration option will be created on the PostgreSQL server.

With the --drop-slot , the previous replication slot will be deleted.

replication-status

The replication-status command reports the status of any streaming client currently attached to the PostgreSQL server, including the receive-wal process of your Barman server (if configured).

You can execute the command as follows:

barman replication-status <server_name>

Tip

You can request a full status report of the replica for all your servers using all as the server name.

To have a machine-readable output you can use the --minimal option.

show-servers

You can show the configuration parameters for a given server with:

barman show-servers <server_name>

Tip

you can request a full configuration report using all as the server name.

status

The status command shows live information and status of a PostgreSQL server or of all servers if you use all as server name.

barman status <server_name>

switch-wal

This command makes the PostgreSQL server switch to another transaction log file (WAL), allowing the current log file to be closed, received and then archived.

barman switch-wal <server_name>

If there has been no transaction activity since the last transaction log file switch, the switch needs to be forced using the --force option.

The --archive option requests Barman to trigger WAL archiving after the xlog switch. By default, a 30 seconds timeout is enforced (this can be changed with --archive-timeout ). If no WAL file is received, an error is returned.

Note

In Barman 2.1 and 2.2 this command was called switch-xlog . It has been renamed for naming consistency with PostgreSQL 10 and higher.

verify

The verify command uses backup_manifest file from backup and runs pg_verifybackup against it. edb_notranlate_16 This command will call pg_verifybackup <path_to_backup_manifest> -n (available on PG>=13) pg_verifybackup Must be installed on backup server. For rsync backups, it can be used with generate-manifest command.

Either backup_id backup id shortcuts can be used.