Configuring PgBouncer

Configuring PgBouncer#

You must configure PgBouncer to work with the PEM database server.

Prerequisites#

  • If you’re running EDB Postgres Advanced Server, install EDB PgBouncer .

  • If you’re running EDB Postgres Extended Server or PostgreSQL, install community PgBouncer .

EDB PgBouncer and PgBouncer installation considerations#

The name and location of the directories and files in the configuration steps, as well as the user, depend on whether you installed the community version of PgBouncer or EDB PgBouncer. If you installed community PgBouncer (whether you install it from the community repo or the EDB repo), replace the names of the files and directories in the worked example with the values for PgBouncer.

Name

PgBouncer

EDB PgBouncer

PgBouncer directory

/etc/pgbouncer

/etc/edb/pgbouncer<1.x>

ini file

pgbouncer.ini

edb-pgbouncer.ini

HBA file

/etc/pgbouncer/hba_file

/etc/edb/pgbouncer<1.x>/hba_file

Service file

pgbouncer

edb-pgbouncer-<1.x>

User

postgres

enterprisedb

Configuring PgBouncer#

This example configures EDB PgBouncer with the enterprisedb system user.

If you’re running community PgBouncer, replace the names of the directories, files, and user as explained in EDB PgBouncer and PgBouncer installation considerations .

  1. Open a terminal window and navigate to the PgBouncer directory.

  2. Change the owner of the etc directory for PgBouncer (where edb-pgbouncer.ini resides) to enterprisedb , and change the directory permissions to 0700 :

chown -R enterprisedb:enterprisedb /etc/edb/pgbouncer<1.x>
chmod 0700 /etc/edb/pgbouncer<1.x>

  1. Change the contents of the edb-pgbouncer.ini file:

  [databases]
  ;; Change the pool_size according to maximum connections allowed
  ;; to the PEM database server as required.
  ;; auth_user will be used for authenticate the db user (proxy
  ;; agent user in our case)
  pem = port=5444 host=127.0.0.1 dbname=pem auth_user=pgbouncer pool_size=80 pool_mode=transaction
- = port=5444 host=127.0.0.1 dbname=pem auth_user=pgbouncer pool_size=10

  [pgbouncer]
  logfile = /var/log/edb/pgbouncer<1.x>/edb-pgbouncer-<1.x>.log
  pidfile = /var/run/edb/pgbouncer<1.x>/edb-pgbouncer-<1.x>.pid
  listen_addr = *
  ;; Agent needs to use this port to connect the pem database now
  listen_port = 6432
  ;; Set to require to ensure SSL certificates are used for connections
  ;; for PEM Agents
  client_tls_sslmode = require
  ;; These are the root.crt, server.key, server.crt files present
  ;; in the present under the data directory of the PEM database
  ;; server, used by the PEM Agents for connections.
  client_tls_ca_file = /var/lib/edb/as16/data/root.crt
  client_tls_key_file = /var/lib/edb/as16/data/server.key
  client_tls_cert_file = /var/lib/edb/as16/data/server.crt
  ;; Allow pgBouncer to use pem_agent_pool certificate
  ;; and key for connections to the server.
  server_tls_key_file = /var/lib/edb/.postgresql/pem_agent_pool.key
  server_tls_cert_file = /var/lib/edb/.postgresql/pem_agent_pool.crt
  ;; Use hba file for client connections
  auth_type = hba
  ;; HBA file
  auth_hba_file = /etc/edb/pgbouncer<1.x>/hba_file
  ;; Use pem.get_agent_pool_auth(TEXT) function to authenticate
  ;; the db user (used as a proxy agent user).
  auth_query = SELECT * FROM pem.get_agent_pool_auth($1)
  ;; DB User for administration of the pgbouncer
  admin_users = pem_admin1
  ;; auth_dbname and auth_user allow
  ;; admin console login by admin_users and stats_users
  auth_dbname = pem
  auth_user = pgbouncer
  ;; DB User for collecting the statistics of pgbouncer
  stats_users = pem_admin1
  server_reset_query = DISCARD ALL
  ;; Change based on the number of agents installed/required
  max_client_conn = 500
  ;; Close server connection if its not been used in this time.
  ;; Allows to clean unnecessary connections from pool after peak.
  server_idle_timeout = 60
!!!note For more information on auth_user , see Authentication settings . .. ::

  1. Create an HBA file (/etc/edb/pgbouncer<1.x>/hba_file ) for PgBouncer that contains the following content:

# Use the authentication method scram-sha-256 for local connections
# between the pem database & the pgbouncer (virtual) database.
local pgbouncer all scram-sha-256
# Use the authentication method scram-sha-256 for remote connections
# to pgbouncer (virtual database) using the enterprisedb user.
host pgbouncer,pem pem_admin1 0.0.0.0/0 scram-sha-256
# Use the authentication method cert for TCP/IP connections
# to the pem database using pem_agent_user1
hostssl pem pem_agent_user1 0.0.0.0/0 cert

  1. Change the owner of the HBA file (/etc/edb/pgbouncer<1.x>/hba_file) to enterprisedb , and change the directory permissions to 0600 :

chown enterprisedb:enterprisedb /etc/edb/pgbouncer<1.x>/hba_file
chmod 0600 /etc/edb/pgbouncer<1.x>/hba_file

  1. Enable the PgBouncer service, and start the service:

systemctl enable edb-pgbouncer-<1.x>
__OUTPUT__
Created symlink from
/etc/systemd/system/multi-user.target.wants/edb-pgbouncer-<1.x>.service
to /usr/lib/systemd/system/edb-pgbouncer-<1.x>.service.

systemctl start edb-pgbouncer-<1.x>
Contents